G60 Generator Protection System

G60 Generator Protection System

型号︰G60

品牌︰GE

原产地︰美国

单价︰CNY ¥ 1 / 件

最少订量︰1 件

现在查询

产品描述

g imagination at work
• Secure, high-speed protection elements for complete generator
protection, compliant with IEEE® C37.102
• Phasor Measurement Unit (synchrophasor) according to IEEE
C37.118 (2011) and IEC® 61850-90-5 support
• Three independent fiber or copper Ethernet ports for simultaneous/
dedicated network connections with advanced 1 microsecond time
synchronization via LAN with IEEE 1588 support
• Reduced relay-to-relay wiring and associated installation costs
through high-speed inter-relay communications
• Available Ethernet Global Data (EGD) eases integration with new
and existing GE Digital Energy control systems
• Increase network availability by reducing failover time to zero
through IEC 62439-3 “PRP” support
• CyberSentry™ provides high-end cyber security aligned to industry
standards and services (NERC® CIP, AAA, Radius, RBAC, Syslog)
• Robust network security enabling Critical Infrastructure
Protection through user command logging, and dual permission
access control
• Advanced fault and disturbance recording, including internal
relay operating signals, eliminating the need for external
recording devices
• Complete IEC 61850 Process Bus solution provides resource
optimization and minimizes total P&C life cycle costs
• Medium to large generators typically driven by steam, gas or
hydraulic turbines
• Pumped storage generators used as pumping motors for
reservoir storage
• Stand-alone protection or component in automated substation
control systems
• Standard protection product offering on new GE generator
installations
Protection and Control
• Generator stator differential
• 100% stator ground protection 3rd harmonic
• Field ground protection
• 100% stator ground fault protection using
sub-harmonic injection
• Loss of excitation
• Power swing blocking and out-of-step tripping
• Backup distance
• Reverse/low forward power
• Restricted ground fault, thermal overload protection, directional,
time, instantaneous, phase, neutral, negative sequence and
ground overcurrent protection
• Overexcitation
• Generator unbalance
• CT failure for each CT bank, VT fuse failure
• Breaker failure
Communications
• Networking interfaces: up to three Ethernet ports 100Mb fiber or
copper, RS485, RS232, RS422, G.703, C37.94
• Multiple protocols: IEC 61850, DNP 3.0 and Modbus® serial/TCP,
IEEE 1588, IEC 60870-5-104 and 103, PRP, SNTP, HTTP, TFTP, EGD
• Direct I/O: secure, high-speed exchange of data between URs for
direct transfer trip (DTT) and I/O extension applications
IEC 61850 Process Bus Interface
• Robust communications with up to 8 HardFiber Bricks
• Redundant architecture for dependability and security
Monitoring and Metering
• Metering: current, voltage, power, energy, frequency
• Advanced recording capabilities deliver a 1024 event recorder,
configurable and extended waveform capture and data logger
• Advanced relay health diagnostics
• P & M class synchrophasors of voltage, current and sequence
components: 1 to 120 frames/sec
EnerVista™ Software
• Graphical Logic Designer and Logic Monitor to simplify designing
and testing procedures via EnerVista UR Engineer
• Service and update notification toolset ensures device documents
and software are up-to-date via EnerVista Launchpad
• EnerVista Integrator providing easy integration of data in the G60
into new or existing monitoring and control systems
FEATURES
APPLICATIONS
KEY BENEFITS
G60
GENERATOR PROTECTION SYSTEM
Comprehensive Protection for Generators
Multilin™
86
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
Protection and Control
The G60 generator protection system
provides comprehensive protection for
medium and large generators, including
large steam and combustion turbines,
combined-cycle generators and multicircuit
hydro units. The G60 includes
advanced automation and communication
capabilities, extensive I/O options, and
powerful fault recording features that can
simplify postmortem disturbance analysis
and help minimize generator downtime.
As part of the Universal Relay (UR) family,
the G60 provides superior protection and
control that includes:
Generator Stator Differential
High-speed stator differential protection
provides sub-cycle detection and highspeed
clearing of stator phase faults.
Advanced CT saturation and failure
detection algorithms maintain immunity
to high current AC and low current DC
saturation conditions that may occur
due to external disturbances, such as
transformer inrush or near generator
faults, without sacrificing speed or
sensitivity.
100% Stator Ground 3rd Harmonic
100% stator ground fault protection is
provided through a voltage differential
feature that responds to the unbalance
of the third harmonic at the machine
terminals and at the neutral point. This
method is insensitive to the absolute
value of the third harmonic and is
easily set without the need for on-line
measurements. For generators with
delta connected PTs, a third harmonic
undervoltage element is also offered for
detecting a loss of the third harmonic
voltage at the generator neutral.
Breaker Failure Protection
The breaker failure protection element
monitors for timely operation of the
connected breaker. If a trip command is
not successful in operating the breaker
and clearing the fault, the breaker failure
element can be used to send trip signals to
upstream breakers to clear the fault.
Field Ground Protection
Field ground protection identifies the
The G60 is the single point for protection, control, metering, and monitoring in one integrated device
that can easily be connected directly into DCS or SCADA monitoring and control systems like Viewpoint
Monitoring as shown.
50G 51G
64TN
51PV 50BF 51N 46 49 67P 67_2 67N 68 78
24 27P 59P 59_2
Metering
TRIP
SUPERVISED CLOSE
32 40 50/27
59N 81O 81U
27TN 27X 59X
G60 Generator Protection System
G
52
R
87S
87G
50N
81R
21P 50P
25
DEVICE
NUMBER
21P
24
25
27P
27TN
27X
Phase Distance Backup
Volts Per Hertz
Synchrocheck
Phase Undervoltage
Third Harmonic Neutral Undervoltage
Auxiliary Undervoltage
FUNCTION
ANSI DEVICE NUMBERS AND FUNCTIONS
51P
59N
59P
59X
59_2
64TN
Phase Time Overcurrent
Neutral Overvoltage
Phase Overvoltage
Auxiliary Overvoltage
Negative Sequence Overvoltage
100% Stator Ground
DEVICE
NUMBER FUNCTION
4
2 3 3 3 3 4 6 4
2 3 2 4 2 2 2
2 2
2
64S
GPM-S
EX GPM-F 64F
Functional Block Diagram
Device
Number Function
21P Phase Distance Backup
24 Volts Per Hertz
25 Synchronism Check
27P Phase Undervoltage
27TN Third Harmonic Neutral Undervoltage
27X Auxiliary Undervoltage
32 Sensitive Directional Power
40 Loss of Field Relay
46 Generator Unbalance
49 Thermal Overload
50G Ground Instantaneous Overcurrent
50N Neutral Instantaneous Overcurrent
50P Phase Instantaneous Overcurrent
50SP Split Phase Instantaneous Overcurrent
50BF Breaker Failure
50/27 Accidental Energization
51G Ground Time Overcurrent
51PV Phase Time Overcurrent with Voltage Restraint
51N Neutral Time Overcurrent
59N Neutral Overvoltage
59P Phase Overvoltage
59X Auxiliary Overvoltage
59_2 Negative Sequence Overvoltage
64F Field Ground Protection
64S Sub-Harmonic Stator Ground Protection
64TN 100% Stator Ground
67_2 Negative Sequence Directional Overcurrent
67N Neutral Directional Overcurrent
67P Phase Directional Overcurrent
68 Power Swing Blocking
78 Out-of-Step Protection
81O Overfrequency
81R Rate of Change of Frequency
81U Underfrequency
87G Restricted Ground Fault
87S Generator Stator Differential
ANSI Device Numbers & Functions
G60 - Protection, Metering, Monitoring and Control
87
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
blocking input provide security for blown
VT fuses and power swing conditions.
Power Swing/Out-of-Step
The power swing blocking element provides
blocking of the backup distance element
and other protections under power swing
conditions. Negative sequence current
supervisors provide extended selectivity for
detecting evolving faults that may appear
as a power swing event (faults with slow
moving impedance locus). Additionally,
the out-of-step tripping element can be
used for tripping the generator when an
unstable power swing is detected.
Backup Phase Distance
Three separate phase distance elements
provide time-delayed backup protection for
generator faults that have not otherwise been
cleared by the primary system and generator
protection. Each zone can independently
compensate for power transformers, so
compensation can be applied for zones
reaching out into the system through the
unit transformer, while zones looking into the
stator can remain uncompensated.
Sensitive Directional Power
Two separate directional power elements
are provided to detect generator motoring
to protect the prime mover from damage.
Each element responds to either reverse or
low forward power flow and can be used to
provide independent alarm and trip settings.
Restricted Ground Fault (87G)
occurrence of a ground fault in a generator
field winding and helps to prevent serious
damage to the generator, maximizing
operational lifespan. The field ground
protection module (GPM-F) works in
combination with the G60 to detect ground
faults in the field winding of the generator.
The solution includes: two-stage field
ground detection, injected voltage and
current supervision, brush lift-off detection,
field over and undercurrent elements and
field ground fault location.
100% Stator Ground Fault
Protection Using Sub-Harmonic
Injection
Protecting the generator from internal faults
is critical to maintaining the overall life of the
generator. Using the 100% stator ground
fault protection based on sub-harmonic
injection, a 20Hz voltage is injected to
detect ground faults at any point across
100% of the winding. The stator ground
module (GPM-S) works in combination with
the G60 to provide 100% stator ground
fault protection that is operational during
generator start-up, running and stopped
conditions. The solution includes: twostage
stator ground detection, injected
voltage and current supervision and ground
overcurrent element.
Loss of Excitation
Generator loss of excitation protection
is provided via two negative offset mho
characteristics as per IEEE C37.102.
Inadvertent pickup time delay settings and
RGF protection (also known as zerosequence
differential) extends protection
coverage to the neutral point of the
stator winding, where fault currents may
be below the pickup of the main stator
differential element. The low-impedance
(87G) protection provided by the G60 uses
an optimized adaptive restraint signal
that provides security for external fault
conditions that may cause CT saturation
while still maintaining sensitivity for internal
faults.
Pumped Storage Generator
The G60 can be used for protecting
generators that are also run as pumped
storage motors, without the need for
switching the CT secondary circuitry. The
G60 is able to automatically compensate
for the phase reversal that occurs when
the generator is being run as a motor.
Synchronism Check
The G60 provides four elements to monitor
differences in voltage magnitudes, phase
angles, and frequencies to perform
synchronism checks across breakers (up to
four). The G60 can be used in conjunction
with an external synchronizer as an
independent check of the synchronizer
prior to closing the generator breaker.
Temperature Protection
(RTD Module Option 5C)
The G60 RTD option provides 8
programmable RTD inputs per module that
are used for temperature monitoring. Each
RTD input has 2 operational levels: alarm
and trip. The G60 supports RTD trip voting
and provides open RTD failure alarming.
Alternatively, a remote RTD module,
“RRTD”, which supports 12 RTD inputs, can
also be used with the G60 for temperature
monitoring. The RRTD provides cost savings
compared with standard RTD wiring.
IEC 61850 Process Bus
The IEC 61850 Process Bus module is
designed to interface with the Multilin
HardFiber System, allowing bi-directional
IEC 61850 fiber optic communications. The
HardFiber System is designed to integrate
seamlessly with existing UR applications,
including protection functions, FlexLogic™,
metering and communications.
The Multilin HardFiber System offers the
following benefits:
The G60 percent differential element has enhanced saturation detection algorithms to provide additional
security against AC and DC saturation that can occur during faults near the generator.
G60 Percent Differential Element
88
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
• Communicates using open standard
IEC 61850 messaging
• Drastically reduces P&C design,
installation and testing labor by
eliminating individual copper terminations
• Integrates with existing G60’s by
replacing traditional CT/VT inputs with
the IEC 61850 Process Bus module
• Does not introduce new cyber security
concerns
Visit the HardFiber System product page
on the GE Digital Energy web site for more
details.
Advanced Automation
The G60 incorporates advanced automation
features including powerful FlexLogic
programmable logic, communication, and
SCADA capabilities that far surpass what
is found in the average generator relay.
The G60 integrates seamlessly with other
UR relays for complete system protection,
including unit and auxiliary transformers,
and balance of plant protection.
FlexLogic
FlexLogic is the powerful UR-platform
programming logic engine that provides the
ability to create customized protection and
control schemes, minimizing the need and
associated costs of auxiliary components
and wiring. Using FlexLogic, the G60 can
be programmed to provide the required
tripping logic along with custom scheme
logic for generator breaker control (including
interlocking with external synchronizers),
transfer tripping schemes for remote breakers
and dynamic setting group changes.
Scalable Hardware
The G60 is available with a multitude
of I/O configurations to suit the most
demanding application needs. The
expandable modular design allows for
easy configuration and future upgrades.
• Multiple CT/VT configurations allow for
the implementation of many different
schemes, including concurrent splitphase
and differential protection
• Flexible, modular I/O covering a broad
range of input signals and tripping
schemes
• Types of digital outputs include triprated
Form-A and Solid State Relay (SSR)
mechanically latching, and Form-C outputs
• Form-A and SSR outputs available with
optional circuit continuity monitoring
and current detection to verify continuity
and health of the associated circuitry
• Mechanically latching outputs
can be used to develop secure
interlocking applications and replace
electromechanical lockout relays
• RTDs and DCmA inputs are available to
monitor equipment parameters such as
temperature and pressure
Monitoring and Metering
The G60 includes high accuracy metering
and recording for all AC signals. Voltage,
current, and power metering are built into
the relay as a standard feature. Current and
voltage parameters are available as total
RMS magnitude, and as fundamental
frequency magnitude and angle.
Fault and Disturbance Recording
The advanced disturbance and event
recording features within the G60 can
significantly reduce the time needed for
postmortem analysis of power system
events and the creation of regulatory
reports. Recording functions include:
• Sequence of Event (SOE)
- 1024 time stamped events
• Oscillography
- 64 digital & up to 40 analog channels
- Events up to 45s in length
• Data Logger and Disturbance Recording
- 16 channels up to 1 sample/cycle/
channel
• Fault Reports
- Powerful summary report of pre-fault
and fault values
The very high sampling rate and large
amount of storage space available for
data recording in the G60 can eliminate
the need for installing costly stand-alone
recording equipment.
Advanced Device Health
Diagnostics
The G60 performs comprehensive device
health diagnostic tests at startup and
continuously during run-time to test its own
major functions and critical hardware. These
diagnostic tests monitor for conditions that
could impact security and availability of
protection, and present device status via
SCADA communications and front panel
display. Providing continuous monitoring
and early detection of possible issues help
improve system uptime.
• Comprehensive device health
diagnostic performed at startup
• Monitors the CT/VT input circuitry to
validate the integrity of all signals
Cyber Security –
CyberSentry UR
CyberSentry UR enabled UR devices deliver
full cyber security features that help
customers to comply with NERC CIP and
NIST® IR 7628 cyber security requirements.
This software option delivers the following
core features:
AAA Server Support (Radius/LDAP)
Enables integration with centrally managed
authentication and accounting of all
user activities and uses modern industry
best practices and standards that meet
and exceed NERC CIP requirements for
authentication and password management.
Role Based Access Control (RBAC)
Efficiently administrate users and roles
within UR devices. The new and advanced
access functions allow users to configure up
to five roles for up to eight configurable users
with independent passwords. The standard
“Remote Authentication Dial In User Service”
(Radius) is used for authentication.
Event Recorder (Syslog for SEM)
Capture all cyber security related events
within a SOE element (login, logout, invalid
password attempts, remote/local access,
user in session, settings change, FW
update, etc), and then serve and classify
data by security level using standard
Syslog data format. This will enable
integration with established SEM (Security
Event Management) systems.
Communications
The G60 provides advanced communications
technologies for remote data and
engineering access, making it easy and
flexible to use and integrate into new and
existing infrastructures. Direct support for
fiber optic Ethernet provides high-bandwidth
communications allowing for low-latency
controls and high-speed file transfers of
89
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
relay fault and event record information.
The available three independent Ethernet
ports, redundant Ethernet option and
the embedded managed Ethernet switch
provide the means to create fault tolerant
communication architectures in an easy,
cost-effective manner without the need
for intermediary communication hardware.
The G60 supports the most popular industry
standard protocols enabling easy, direct
integration into DCS and SCADA systems.
• IEC 61850 with 61850-90-5 support
• DNP 3.0
• Ethernet Global Data (EGD)
• IEC 60870-5-103 and IEC 60870-5-104
• IEEE 1588 for time synchronization
• Modbus RTU, Modbus TCP/IP
• PRP as per IEC 62439-3
Interoperability with Embedded
IEC 61850
Use the G60 with integrated IEC 61850
to lower costs associated with generator
protection, control and automation. GE
Digital Energy’s leadership in IEC 61850
comes from thousands of installed devices
and follows on extensive development
experience with UCA 2.0.
• Replace expensive copper wiring
between devices with direct transfer of
data using GOOSE messaging
• Configure GE systems based on
IEC 61850 and also monitor and
troubleshoot them in real-time with
EnerVista Viewpoint Engineer
• Multicast IEEE C37.118 synchrophasor
data between PMU and PDC devices
using IEC 61850-90-5
Direct I/O Messaging
Direct I/O allows for the sharing of
high-speed digital information between
multiple UR relays via direct back-to-back
connections or multiplexed through a
standard DS0 multiplexer channel bank.
Regardless of the connection method,
direct I/O provides continuous realtime
channel monitoring that supplies
diagnostics information on channel health.
Direct I/O provides superior relay-to-relay
communications that can be used in
advanced interlocking, generation rejection
and other special protection schemes.
• Communication with up to 16 UR relays
in single or redundant rings rather than
strictly limited to simplistic point-to-point
configurations between two devices
• Connect to standard DS0 channel
banks through standard RS422, G.703
or IEEE C37.94 interfaces or via direct
fiber optic connections
• No external or handheld tester required
to provide channel diagnostic information
LAN Redundancy
Substation LAN redundancy has been
traditionally accomplished by reconfiguring
the active network topology in case of failure.
Regardless of the type of LAN architecture
(tree, mesh, etc), reconfiguring the active
LAN requires time to switchover, during
which the LAN is unavailable. UR devices
deliver redundancy as specified by PRP-IEC
62439-3, which eliminates the dependency
on LAN reconfiguration and the associated
switchover time. The UR becomes a dual
attached node that transmits data packets
over both main and redundant networks
simultaneously, so in case of failure, one
of the data packets will reach the receiving
device with no time delay.
Analyze generator faults using both analog and
digital power system quantities that are measured
and recorded up to a rate of 64 samples per cycle.
Log generator operating parameters to allow for analyzing generator
loading and performance over weeks and months.
Record the operation of the internal
G60 elements and external connected
devices with 1ms time-stamped
accuracy to identify the Sequence of
Operation of station devices during
generator faults and disturbances.
Power System Troubleshooting
The G60 contains many tools and reports that simplify and reduce the amount of time required for troubleshooting power system events.
90
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
Multi-Language
UR devices support multiple languages:
English, French, Russian, Chinese, Turkish
and German. These language options are
available on the front panel, in the EnerVista
setup software, and in the product manuals.
Easily switch between English and an
additional language on the local displays
without uploading new firmware.
EnerVista Software
The EnerVista suite is an industry-leading
set of software programs that simplifies
every aspect of using the G60 relay. The
EnerVista suite provides all the tools
to monitor the status of the protected
asset, maintain the relay, and integrate
information measured by the G60 into DCS
or SCADA monitoring systems. Convenient
COMTRADE and SOE viewers are an
integral part of the UR setup software
included with every UR relay, to carry out
postmortem event analysis and ensure
proper protection system operation.
EnerVista Launchpad
EnerVista Launchpad is a powerful
software package that provides users with
all of the setup and support tools needed
for configuring and maintaining Multilin
products. The setup software within
Launchpad allows for the configuration
of devices in real-time by communicating
using serial, Ethernet, or modem
connections, or offline by creating setting
files to be sent to devices at a later time.
Included in Launchpad is a document
archiving and management system
that ensures critical documentation is
up-to-date and available when needed.
Documents made available include:
• Manuals
• Application Notes
• Guideform Specifications
• Brochures
• Wiring Diagrams
• FAQs
• Service Bulletins
Viewpoint Monitoring
Viewpoint Monitoring is a simple-to-use
and full-featured monitoring and data
recording software package for small
systems. Viewpoint Monitoring provides a
complete HMI package with the following
functionality:
• Plug & Play Device Monitoring
• System Single-Line Monitoring & Control
• Annunciator Alarm Screens
• Trending Reports
• Automatic Event Retrieval
• Automatic Waveform Retrieval
Viewpoint UR Engineer
Viewpoint UR Engineer is a set of powerful
tools that allows the configuration and
testing of GE relays at a system level in
an easy-to-use graphical drag-and-drop
environment. Viewpoint UR Engineer
provides the following configuration and
commissioning utilities:
• Graphical Logic Designer
• Graphical System Designer
• Graphical Logic Monitor
• Graphical System Monitor
Viewpoint Maintenance
Viewpoint Maintenance provides tools that
will create reports on the operating status
of the relay, simplify the steps to download
fault and event data, and reduce the work
required for cyber security compliance
audits. Tools available in Viewpoint
Maintenance include:
• Settings Security Audit Report
• Device Health Report
• Single-Click Fault Data Retrieval
EnerVista Integrator
EnerVista Integrator is a toolkit that allows
seamless integration of Multilin devices
into new or existing automation systems.
Included in EnerVista Integrator is:
• OPC/DDE Server
• Multilin Drivers
• Automatic Event Retrieval
• Automatic Waveform Retrieval
The internal operation of the G60 elements, logic, and outputs can be monitored
in real-time to simplify commissioning and troubleshooting procedures.
Create G60 setting file templates to ensure critical settings are not altered.
Simplifying Commissioning and Testing Simplifying G60 Configuration
91
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
48 Configurable LED indicators
Multi-Language
Display
• English
• Russian
• French
• Chinese
• Turkish
• German
User-Programmable Pushbuttons
User Interface
The G60 front panel provides extensive
local HMI capabilities. The local display
is used for monitoring, status messaging,
fault diagnosis, and device configuration.
User-configurable messages that combine
text with live data can be displayed when
user-defined conditions are met.
1
Power
Supply
9
CPU
X W V U T S R P N M L K J H G F D B minimum GROUND
BUS
G60 GENERATOR MANAGEMENT RELAY
RS-232
DB-9
(front)
UR COMPUTER
1
TXD RXD
RXD TXD
SGND SGND
1 8
3
2
20
7
6
4
5
22
CONNECTOR CONNECTOR
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
6
Inputs/
outputs
8
VT/CT
8
CT
TC
TC
2
1
SURGE
H6a
H8a
H5b
H7b
H8b
H5a
H7a
H6c
H8c
H5c
H7c
H1a
H2b
H1c
H1b
H2c
H2a
H4a
H4c
H3b
H3a
H4b
H3c
H1
H2
H3
H4
6G I
V
I
V
I
V
I
V
CRITICAL
FAILURE
OUTPUT
CONTROL
POWER
HI
LO
1
FILTER
SURGE
B3a
B1b
B8a
B6b
B8b
B6a
B3b
B1a
B2b
B5b
DC
F1c
F4a
F8c
F8a
F3c
F5a
F5c
F7c
F6a
F7a
F6c
F2c
VX
VA
VB
VC
F4c
F1a
F4b
F1b
F2a
F3a
F2b
F3b
VX
VA
VB
VC
IA
IB
IC
IG
IA5
IA1
IB5
IC5
IG5
IB1
IC1
IG1
M3c
M4c
M4b
M4a
M1c
M1a
M1b
M3b
M2a
M3a
M2b
M2c
IA
IB
IC
IG
IA5
IA1
IB5
IC5
IG5
IB1
IC1
IG1
A
B
C
R
PROVIDED
F
F
F
F
F
F
5a
5c
7c
6a
7a
6c
VA
VB
VC
VA
VB
VC
Multilin
com
10BaseFL
10BaseFL
10BaseT
D1a
D2a
D4b
D3a
D4a IRIG-B
Input
IRIG-B
Output
COM
1
RS485
ALTERNATE
NORMAL
Tx2
Tx1
BNC
Fibre
Optic
*
Remote
Device
Shielded
Co-axial
Rx2
Rx1
BNC
Co-axial
G60-H00-HCH-F8F-H6G-M8H-PXX-UXX-WXX
Typical Wiring
G60 - * 00 - H * * - F ** - H ** - M ** - P ** - U ** - W/X ** For full size
Base Unit G60 Base Unit
CPU E RS485 + RS485 (IEC 61850 option not available)
J RS485 + multimode ST 100BaseFX
K RS485 + multimode ST Redundant 100BaseFX
N RS485 + 10/100 BaseT
T RS485 + three multimode SFP LC 100BaseFX. Req FW v7xx or higher
U RS485 + two multimode SFP LC 100BaseFX + one SFP RJ45 100BaseT.
Req FW v7xx or higher
V RS485 + three SFP RJ45 100BaseT. Req FW v7xx or higher
Software Options 00 No Software Options
(see note 1 below) 01 Ethernet Global Data (EGD)
03 IEC 61850
04 Ethernet Global Data (EGD) + IEC 61850
05 Phasor Measurement Unit (PMU)
06 IEC 61850 + Phasor Measurement Unit (PMU)
A0 CyberSentry UR Lvl 1. Req UR FW 7.xx or higher
B0 IEEE 1588. Req UR FW 7.xx or higher
C0 PRP
D0 IEEE 1588 + CyberSentry UR. Req UR FW 7.xx or higher
Mount / Coating H Horizontal (19” rack) - Standard
A Horizontal (19” rack) - Harsh Environment Coating
V Vertical (3/4 size) - Standard
B Vertical (3/4 size) - Harsh Environment Coating
User Interface F Vertical Front Panel with English Display
I Enhanced German Front Panel
J Enhanced German Front Panel with User-Programmable Pushbuttons
K Enhanced English Front Panel
L Enhanced English Front Panel with User-Programmable Pushbuttons
M Enhanced French Front Panel
N Enhanced French Front Panel with User-Programmable Pushbuttons
Q Enhanced Russian Front Panel
T Enhanced Russian Front Panel with User-Programmable Pushbuttons
U Enhanced Chinese Front Panel
V Enhanced Chinese Front Panel with User-Programmable Pushbuttons
W Enhanced Turkish Front Panel
Y Enhanced Turkish Front Panel with User-Programmable Pushbuttons
Power Supply H 125 / 250 V AC/DC
(see note 2 below) H RH 125/250 V AC/DC with redundant 125/250 V AC/DC
L 24 - 48 V (DC only)
CT/VT DSP 8L 8L Standard 4CT/4VT w/ enhanced diagnostics
8M 8M Sensitive Ground 4CT/4VT w/ enhanced diagnostics
8N 8N Standard 8CT w/ enhanced diagnostics
8R 8R Sensitive Ground 8CT w/ enhanced diagnostics
IEC 61850 Process Bus 81 8 Port IEC 61850 Process Bus Module
Digital I/O XX XX XX XX XX No module
4A 4A 4A 4A 4A 4 Solid State (No Monitoring) MOSFET Outputs
4C 4C 4C 4C 4C 4 Solid State (Current w/opt Voltage) MOSFET Outputs
4D 4D 4D 4D 4D 16 Digital Inputs with Auto-Burnish
4L 4L 4L 4L 4L 14 Form-A (No Monitoring) Latchable Outputs
67 67 67 67 67 8 Form-A (No Monitoring) Outputs
6C 6C 6C 6C 6C 8 Form-C Outputs
6D 6D 6D 6D 6D 16 Digital Inputs
6E 6E 6E 6E 6E 4 Form-C Outputs, 8 Digital Inputs
6F 6F 6F 6F 6F 8 Fast Form-C Outputs
6K 6K 6K 6K 6K 4 Form-C & 4 Fast Form-C Outputs
6L 6L 6L 6L 6L 2 Form-A (Current w/ opt Voltage) & 2 Form-C Outputs, 8 Digital Inputs
6M 6M 6M 6M 6M 2 Form-A (Current w/ opt Voltage) & 4 Form-C Outputs, 4 Digital Inputs
6N 6N 6N 6N 6N 4 Form-A (Current w/ opt Voltage) Outputs, 8 Digital Inputs
6P 6P 6P 6P 6P 6 Form-A (Current w/ opt Voltage) Outputs, 4 Digital Inputs
6R 6R 6R 6R 6R 2 Form-A (No Monitoring) & 2 Form-C Outputs, 8 Digital Inputs
6S 6S 6S 6S 6S 2 Form-A (No Monitoring) & 4 Form-C Outputs, 4 Digital Inputs
6T 6T 6T 6T 6T 4 Form-A (No Monitoring) Outputs, 8 Digital Inputs
6U 6U 6U 6U 6U 6 Form-A (No Monitoring) Outputs, 4 Digital Inputs
6V 6V 6V 6V 6V 2 Form-A (Cur w/ opt Volt) 1 Form-C Output, 2 Latching Outputs, 8 Digital Inputs
Transducer I/O 5A 5A 5A 5A 5A 4 dcmA Inputs, 4 dcmA Outputs
5C 5C 5C 5C 5C 8 RTD Inputs
5D 5D 5D 5D 5D 4 RTD Inputs, 4 dcmA Outputs
5E 5E 5E 5E 5E 4 dcmA Inputs, 4 RTD Inputs
5F 5F 5F 5F 5F 8 dcmA Inputs
Inter-Relay Communications 7A 820 nm, multimode, LED, 1 Channel
7B 1300 nm, multimode, LED, 1 Channel
7C 1300 nm, singlemode, ELED, 1 Channel
7H 820 nm, multimode, LED, 2 Channels
7I 1300 nm, multimode, LED, 2 Channels
7J 1300 nm, singlemode, ELED, 2 Channels
7S G.703, 2 Channels
7W RS422, 2 Channels
76 IEEE C37.94, 820 nm, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, multimode, LED, 2 Channel
92
G60 Generator Protection System
Generator Protection
GEDigitalEnergy.com
Ordering Notes: 1. To view all available model order codes, options for G60 or to order the UR Classic Front Panel, please visit GE’s On-Line Store at http://store.gedigitalenergy.com/viewprod.asp?model=G60
2. Redundant power supply only available in horizontal unit. If redundant is chosen, must be same type. Maximum 2 per chassis
Ordering
• UR Applications I Learning CD TRCD-URA1-C-S-1
• Multilink Ethernet Switch ML2400-F-HI-HI-A2-A2-A6-F1
• Viewpoint Engineer VPE-1
• Viewpoint Maintenance VPM-1
• Viewpoint Monitoring IEC 61850 VP-1-61850
Accessories for the G60
IEC is a registered trademark of Commission Electrotechnique Internationale. IEEE is a registered
trademark of the Institute of Electrical Electronics Engineers, Inc. Modbus is a registered trademark
of Schneider Automation. NERC is a registered trademark of North American Electric Reliability
Council. NIST is a registered trademark of the National Institute of Standards and Technology.
GE, the GE monogram, Multilin, FlexLogic, EnerVista and CyberSentry are trademarks of General
Electric Company.
GE reserves the right to make changes to specifications of products described at any time without
notice and without obligation to notify any person of such changes.
Copyright 2013, General Electric Company.
GEA-12587G(E)
English
131108

产品图片